• Instructions Home Page
• What You Will Need
• For Perfectionists Only
• Take Inventory
• Initial Crankcase Assembly
• Displacer Assembly
• Cylinder Assembly
• Piston Assembly
• Air Leak Test
• Read/Add Customer Comments
• Download .pdf

1) Locate the Crankcase [C1] and Short Brass Tube [C5]. Carefully apply a small bit of adhesive to the outside of one end of the Brass Tube, and insert into the Crankcase as shown. Be careful that no adhesive gets into the inside of the Brass Rod. Set the Crankcase Assembly aside to set/dry.

Kit Instructions Home Page

top